Mass Transit
This rugged two-layer, four conductor laminated bus bar is production built for a Hybrid Transit Inverter application. The perimeter is a laminated, sealed-edge construction, and the design shows the simplicity of combining electrolytic capacitors, resistor networks, and power modules (IGBT, SiC or GaN) into a single, compact bus bar system.
Size: 10” x 11” | Thickness: .125” | Voltage: 1015VDC | Current: 280A
Public Transportation
When power has to be routed through tight confines that twist and turn, MERSEN’s epoxy powder coating provides 100% dielectric protection. This two-conductor laminated assembly includes bonded ceramic chokes, nylon reinforced mounting holes, and floating clinch hardware for easy installation and optimized electrical performance in an automotive environment.
Size: 4” x 9” | Conductors: .125” | Voltage: 150VDC | Current: 100A
Electric Vehicle Power Electronics
Individually laminated, this two-conductor bus bar connects electrolytic capacitors and IGBT, SiC or GaN modules in a small, lightweight package for an EV Inverter.